Ford Ranger Super Duty (2025+) UHF Behind Dash Module Mount - Pirate Camp Co
Pirate Camp Co.A behind dash UHF module mount for the Ford Ranger Super Duty (2025-Current) that puts the radio body behind the glove box on existing factory bolts, instead of cable tied to a wiring loom. Mild steel with a powder coated finish, and Pirate Camp Co put the install at about five minutes once you are behind the trim.
What vehicles does this fit?
| Make | Model | Variant | Body | Years | Fit |
|---|---|---|---|---|---|
| Ford | Ranger Super Duty | - | All | 2025-Current | Direct fit |
| Ford | Ranger Next Gen (P703) | - | Dual Cab | 2022-Current | Does not fit |
| Ford | Everest Next Gen (U704) | - | Wagon | 2022-Current | Does not fit |
Key features
- Mounts behind the glove box using existing factory bolts
- Mild steel with a powder coated finish
- Suits GME XRS-330 and XRS-335, and Uniden 5060 and 8060
- Does not suit the GME XRS-370, XRS-375, XRS-390, XRS-395 or any similar sized unit
- Australian made and owned
Specifications
- Material: mild steel
- Finish: powder coated
- Module size: GME XRS-330 and XRS-335 chassis, nothing larger
- Install time: about 5 minutes
Fitting and installation
Bolt the bracket in behind the glove box on the existing factory bolts, attach the module cradle that came with your radio, then fit the module. Nothing is drilled. The trim work to get in there is the fiddly part rather than the bracket, so take your time on the clips.
What's included
- Behind dash module mount
Not included: the UHF radio, the module cradle that ships with the radio, handpiece, aerial, aerial base and coax.
Frequently asked questions
Which radios does it suit?
Pirate Camp Co list the GME XRS-330 and XRS-335, and the Uniden 5060 and 8060. They state it does not suit the GME XRS-370, XRS-375, XRS-390, XRS-395 or any similar sized unit. For a larger module, the driver's side footwell mount suits the GME XRS-370, XRS-370c and XRS-390.
Can I still get to the radio after it is fitted?
The module sits behind the glove box, so reaching it later means pulling the glove box or the trim panel rather than unbolting the bracket. Worth thinking about if you reprogram channels often.
Does fitting require drilling?
No. Pirate Camp Co state the mount picks up existing factory bolts behind the dash, so nothing is drilled.
Behind the dash or in the footwell?
Behind the dash keeps the cabin looking factory and suits modules up to the XRS-330 and XRS-335 size. The footwell mount is quicker to reach and suits the larger GME XRS-370, XRS-370c and XRS-390. Pirate Camp Co make both for this vehicle.