Ford F-150 Raptor (2017-2022) Vengeance Front Bumper - Fab Fours
The Vengeance is the non-winch bar in the Fab Fours range for the Ford F-150 Raptor. If you are not running a winch, this is the one that makes sense: you are not paying for a winch cradle…
Overview
- 3/16 inch plate steel, made in the USA
- No winch cradle, so less steel and less cost than the Matrix
- Slim profile that sits tight to the front of the truck and gives back tyre clearance
- Centre mount takes a 20 inch light bar
- Side slots and tabs for up to four cube lights, tested with Rigid D-series 3x3 cubes
- Integrated D-ring mounts, sensor holes and removable light inserts
- Brand
- Fab Fours
- Product type
- Bull Bar
- SKU
- FF17-D4351-1
Fitment and delivery
Check the fitment details in the product description against your vehicle before ordering. Model, year, variant and existing modifications can affect fitment.
Product details
What to know before ordering
Description, fitment and specifications
The Vengeance is the non-winch bar in the Fab Fours range for the Ford F-150 Raptor. If you are not running a winch, this is the one that makes sense: you are not paying for a winch cradle you will never use and not carrying the extra steel that goes with it. Roughly 52kg, 3/16 inch plate steel, made in the USA.
What vehicles does this fit?
| Make | Model | Variant | Body | Years | Fit |
|---|---|---|---|---|---|
| Ford | F-150 Raptor | Gen 2 | All cab styles | 2017-2020 | Direct fit |
| Ford | F-150 Raptor | Gen 3 | All cab styles | 2021-2022 | Direct fit |
| Ford | F-150 (non-Raptor) | All variants | - | 2021-2022 | Does not fit |
| Ford | F-250 / F-350 Super Duty | - | - | 2017-2022 | Does not fit |
Fab Fours list this bumper for the 2017-2022 Ford F-150 Raptor under part number FF17-D4351-1. Fab Fours also state the bar is not suitable for vehicles running a body lift.
Key features
- 3/16 inch plate steel, made in the USA
- No winch cradle, so less steel and less cost than the Matrix
- Slim profile that sits tight to the front of the truck and gives back tyre clearance
- Centre mount takes a 20 inch light bar
- Side slots and tabs for up to four cube lights, tested with Rigid D-series 3x3 cubes
- Integrated D-ring mounts, sensor holes and removable light inserts
Specifications
| Construction | 3/16 inch plate steel (approximately 4.8mm) |
| Weight | Approximately 52kg |
| Finish | Black powder coat |
| Centre light mount | 20 inch (508mm) light bar |
| Winch | No winch cradle |
| Fitment | Ford F-150 Raptor, 2017-2022 |
| Warranty | 24 months (Fab Fours) |
| Part number | FF17-D4351-1 |
Sensor and safety system compatibility
The bar has integrated D-ring mounts and sensor holes, and Fab Fours state it accommodates the OE front camera. Frontal protection is a regulated fitment in Australia and Fab Fours build to US standards. NXG make no compliance claim of our own.
What's included
- Vengeance front bumper
- Removable light inserts
Not included: lights and fitting. This bar is not supplied with a winch cradle.
Frequently asked questions
Does it fit a 2021 or 2022 Raptor?
Yes. Fab Fours list this bumper for the 2017-2022 Ford F-150 Raptor under part number FF17-D4351-1. It is the same part across the range, so order it against the Raptor rather than the trim.
Can I fit a winch to it later?
No. The Vengeance is not supplied with a winch cradle, and that is the point of it. If there is any chance you will want a winch, buy the Matrix instead. It carries a 9,000lb rated mount in a similar slim profile and saves you buying two bars.
What is the difference between the Vengeance and the Matrix?
The winch cradle. Both are 3/16 inch plate steel with the same slim profile, D-ring mounts and sensor holes. The Matrix adds a rated winch mount and takes a 30 inch light bar. The Vengeance takes a 20 inch bar and costs less because there is less steel in it.
How many cube lights will it take?
Up to four in the side slots and tabs, plus a 20 inch bar in the centre mount. Fab Fours have tested the openings with Rigid D-series 3x3 cubes. The light inserts are removable, so you can run it blank and add lights later.
Will it fit with a body lift?
No. Fab Fours state the bar is not suitable for vehicles with a body lift, because a lift shifts the body relative to the chassis mounts the bumper bolts to. A suspension lift is a different matter, so tell us what the truck is running.