{"product_id":"ford-ranger-raptor-next-gen-fighter-rear-bar-option-4wd","title":"Ford Ranger Raptor Next-Gen (2022-Current) Fighter Rear Bar - Option 4WD","description":"\u003cp\u003eThe Option 4WD Fighter rear bar in Raptor-specific fitment for the Ford Ranger Raptor Next Gen (P703), part OPTFIRB-FR. Full bumper replacement in 3mm steel on 5mm mounts, matte black powdercoat, around 55kg. Option 4WD state it is specifically designed for the Next Gen Ford Raptor, and it fits without cutting.\u003c\/p\u003e\u003cp\u003eIf you are running a Raptor hard enough to need underbody protection and a bull bar, the rear is the half of the vehicle you have left exposed. The factory bumper is thin pressed steel and will not take a recovery load.\u003c\/p\u003e\u003ch2\u003eWhat vehicles does this fit?\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eVariant\u003c\/th\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eFit\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eRanger Raptor Next Gen (P703)\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003ctd\u003e2022-Current\u003c\/td\u003e\n\u003ctd\u003eDirect fit, part OPTFIRB-FR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eRanger Next Gen (P703)\u003c\/td\u003e\n\u003ctd\u003eAll variants except Raptor\u003c\/td\u003e\n\u003ctd\u003e2022-Current\u003c\/td\u003e\n\u003ctd\u003eDoes not fit. Order the standard Ranger Fighter Rear Bar, part OPTFIRB-F22\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eRanger Super Duty\u003c\/td\u003e\n\u003ctd\u003eAll\u003c\/td\u003e\n\u003ctd\u003e2025-Current\u003c\/td\u003e\n\u003ctd\u003eDoes not fit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eRanger PX2\/PX3\u003c\/td\u003e\n\u003ctd\u003eAll\u003c\/td\u003e\n\u003ctd\u003e2015-2022\u003c\/td\u003e\n\u003ctd\u003eDoes not fit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eEverest Next Gen (U704)\u003c\/td\u003e\n\u003ctd\u003eAll\u003c\/td\u003e\n\u003ctd\u003e2022-Current\u003c\/td\u003e\n\u003ctd\u003eDoes not fit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRaptor-specific part number, sold separately from the standard Ranger bar\u003c\/li\u003e\n\u003cli\u003eFull replacement of the factory rear bumper, no cutting required\u003c\/li\u003e\n\u003cli\u003e3mm steel body on 5mm mounting plates\u003c\/li\u003e\n\u003cli\u003eReverse lights and number plate lights included as standard\u003c\/li\u003e\n\u003cli\u003eFactory tow hitch and towing harness transfer across from the original bumper\u003c\/li\u003e\n\u003cli\u003eMatte black powdercoat over the whole bar\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e3mm steel, 5mm mounts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eMatte black powdercoat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003eApproximately 55kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping dimensions\u003c\/td\u003e\n\u003ctd\u003e1900 x 450 x 800mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLighting\u003c\/td\u003e\n\u003ctd\u003eReverse and number plate lights included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment type\u003c\/td\u003e\n\u003ctd\u003eFull bumper replacement, no cutting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTowing capacity\u003c\/td\u003e\n\u003ctd\u003eRated to each vehicle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eDesigned in Australia, manufactured in Thailand\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003eOPTFIRB-FR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eSensor and safety system compatibility\u003c\/h2\u003e\u003cp\u003eOption 4WD state the bar is sensor compatible and that all factory features are retained. Sensor coverage on any steel rear bar sits slightly differently to the plastic original, so have the parking sensors and the reversing camera checked once the bar is on.\u003c\/p\u003e\u003cp\u003eOption 4WD state the bar is ADR compliant. Rear bar rules are enforced at state level and they are not identical everywhere, so check what applies in the state where the vehicle is registered before it goes on.\u003c\/p\u003e\u003ch2\u003eFitting and installation\u003c\/h2\u003e\u003cp\u003eThe bar bolts to the existing chassis mounting points on the Raptor. No cutting of the body or the chassis. At roughly 55kg it is a two-person lift, and the reverse and number plate lights have to be wired into the factory loom, so professional installation is recommended.\u003c\/p\u003e\u003ch2\u003eWhat's included\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e rear bar, mounting hardware, reverse lights, number plate lights.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNot included:\u003c\/strong\u003e rated recovery points, tow hitch, towing harness, fitting. The hitch and harness are not supplied because both transfer across from your factory bumper.\u003c\/p\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eWill this rear bar affect my parking sensors?\u003c\/h3\u003e\u003cp\u003eOption 4WD state all factory features are retained. Sensor coverage on any steel rear bar sits slightly differently to the plastic original, so have the system checked once the bar is on.\u003c\/p\u003e\u003ch3\u003eIs this the same bar as the standard Ranger version?\u003c\/h3\u003e\u003cp\u003eNo. Option 4WD sell the Raptor version under its own part number, OPTFIRB-FR, and state it is specifically designed for the Next Gen Ford Raptor. The standard Ranger bar is OPTFIRB-F22 and is listed separately. Order to the vehicle you actually own.\u003c\/p\u003e\u003ch3\u003eDoes it come with recovery points?\u003c\/h3\u003e\u003cp\u003eNo. Option 4WD list rated recovery points as not included as standard. If you want a recovery point at the rear, budget for a rated solution separately and have it fitted at the same time as the bar. Do not use a tow hitch tongue or a tie-down loop as a snatch recovery point.\u003c\/p\u003e\u003ch3\u003eDo I keep my tow bar?\u003c\/h3\u003e\u003cp\u003eYes. Option 4WD state the factory tow hitch transfers across from the original bumper, along with the towing harness. Neither is supplied in the box for that reason. Option 4WD list towing capacity as rated to each vehicle, so your existing tow rating and trailer wiring carry over.\u003c\/p\u003e","brand":"OPTION 4WD","offers":[{"title":"Default Title","offer_id":45167657615560,"sku":"OPTFIRB-FR","price":1890.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0623\/7890\/1704\/files\/OptionFighterrearbarNextGenRaptorred20230505_1.jpg?v=1786254678","url":"https:\/\/nextgenranger.com.au\/products\/ford-ranger-raptor-next-gen-fighter-rear-bar-option-4wd","provider":"NXG","version":"1.0","type":"link"}