{"product_id":"ford-ranger-next-gen-gen3-canopy-crossbar-rack-kit-st-egr","title":"Ford Ranger Next-Gen (2022-Current) GEN3 Canopy Crossbar Rack Kit ST - EGR","description":"\u003cp\u003eYakima TrimHD crossbars paired with EGR's staggered-height leg system for the GEN3 canopy on the Ford Ranger Next Gen (P703). EGR rate the standard configuration at 80kg dynamic. Adding the EGR Internal Support Kit takes that to 150kg dynamic, and the support kit is sold separately. This is the cheaper way onto the canopy roof for boards, ladders or a light awning.\u003c\/p\u003e\u003cp\u003eRead that number before you order. 80kg covers a couple of kayaks and an awning. It does not cover most rooftop tents with two people in them, and that is where this kit gets bought by mistake.\u003c\/p\u003e\u003ch2\u003eWhat vehicles does this fit?\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eMounts to\u003c\/th\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eFit\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eRanger Next Gen (P703)\u003c\/td\u003e\n\u003ctd\u003eEGR GEN3 canopy roof, as supplied\u003c\/td\u003e\n\u003ctd\u003e2022-Current\u003c\/td\u003e\n\u003ctd\u003eDirect fit, 80kg dynamic rating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eRanger Next Gen (P703)\u003c\/td\u003e\n\u003ctd\u003eEGR GEN3 canopy roof with the EGR Internal Support Kit\u003c\/td\u003e\n\u003ctd\u003e2022-Current\u003c\/td\u003e\n\u003ctd\u003eDirect fit, 150kg dynamic rating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eRanger Raptor Next Gen (P703)\u003c\/td\u003e\n\u003ctd\u003eAny\u003c\/td\u003e\n\u003ctd\u003e2022-Current\u003c\/td\u003e\n\u003ctd\u003eNot listed for the Raptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eRanger Next Gen (P703)\u003c\/td\u003e\n\u003ctd\u003eEGR Core canopy\u003c\/td\u003e\n\u003ctd\u003e2022-Current\u003c\/td\u003e\n\u003ctd\u003eDoes not fit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eRanger Next Gen (P703)\u003c\/td\u003e\n\u003ctd\u003eBare tub, hard lid or soft tonneau\u003c\/td\u003e\n\u003ctd\u003e2022-Current\u003c\/td\u003e\n\u003ctd\u003eDoes not fit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eYakima TrimHD crossbars on EGR's staggered-height leg system\u003c\/li\u003e\n\u003cli\u003e80kg dynamic as supplied, 150kg dynamic with the EGR Internal Support Kit\u003c\/li\u003e\n\u003cli\u003eLower cost route onto the GEN3 canopy roof than the full rack kit\u003c\/li\u003e\n\u003cli\u003eEGR estimate around one hour for DIY installation\u003c\/li\u003e\n\u003cli\u003eSuits boards, ladders, awnings and light gear\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCrossbars\u003c\/td\u003e\n\u003ctd\u003eYakima TrimHD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLegs\u003c\/td\u003e\n\u003ctd\u003eEGR staggered-height leg system\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRating as supplied\u003c\/td\u003e\n\u003ctd\u003e80kg dynamic (EGR rated)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRating with Internal Support Kit\u003c\/td\u003e\n\u003ctd\u003e150kg dynamic (EGR rated), kit sold separately\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003eApproximately one hour, DIY (EGR estimate)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuits\u003c\/td\u003e\n\u003ctd\u003eEGR GEN3 canopy only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003e041163\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eFitting and installation\u003c\/h2\u003e\u003cp\u003eThe legs mount to the GEN3 canopy roof and the bars clamp into them. EGR put the DIY install at around an hour. Set the bar spacing to the load before final torque. If you are adding the Internal Support Kit to reach the 150kg figure, fit that first, because it goes in from inside the canopy.\u003c\/p\u003e\u003ch2\u003eWhat's included\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e Yakima TrimHD crossbars, EGR staggered-height legs, fitting hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNot included:\u003c\/strong\u003e canopy, EGR Internal Support Kit, fitting.\u003c\/p\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eCan I put a rooftop tent on this kit?\u003c\/h3\u003e\u003cp\u003eNot on the 80kg dynamic rating it comes with. Weigh your tent before you assume it fits, because a hard shell tent plus two people will usually put you well past that. Adding the EGR Internal Support Kit lifts the rating to 150kg dynamic, and that is the configuration to order if a tent is the plan.\u003c\/p\u003e\u003ch3\u003eHow is this different from the full GEN3 roof rack kit?\u003c\/h3\u003e\u003cp\u003eThis is bars on legs. The full kit, part RACK0054, is a rack supplied with the heavy-duty internal support frame already included and rated at 150kg dynamic. If you are carrying boards, ladders or an awning, this kit does the job for less. If you are sleeping up there, buy the full kit.\u003c\/p\u003e\u003ch3\u003eDo I have to buy the support kit separately?\u003c\/h3\u003e\u003cp\u003eOnly if you need to go past 80kg. The kit works as supplied for lighter loads. The Internal Support Kit is a separate part because plenty of buyers never need it, and it is fitted from inside the canopy, so it is easier to install before the canopy fitout goes in.\u003c\/p\u003e\u003ch3\u003eWhy Yakima TrimHD bars?\u003c\/h3\u003e\u003cp\u003eEGR pair their leg system with Yakima's TrimHD crossbars rather than a house-brand bar, which means the accessory mounts and carriers already made for TrimHD will fit. If you have Yakima gear on another vehicle, check the fitting before you buy a second set.\u003c\/p\u003e","brand":"EGR","offers":[{"title":"Default Title","offer_id":45167658434760,"sku":"041163","price":549.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0623\/7890\/1704\/files\/CAM00645_copy__54982.1766098136.jpg?v=1786325864","url":"https:\/\/nextgenranger.com.au\/products\/ford-ranger-next-gen-gen3-canopy-crossbar-rack-kit-st-egr","provider":"NXG","version":"1.0","type":"link"}